01
Epoxy resin injection
Low-viscosity epoxy structurally welds dormant cracks under controlled pressure, restoring load transfer.
Injection & Repair
Structural Crack Injection UAE
Epoxy injection to restore monolithic concrete integrity.
Structural crack injection bonds a dormant crack back into monolithic concrete using a low-viscosity structural epoxy. Surface ports are set, the crack face is sealed, and resin is injected under controlled pressure until it travels through the full depth of the section.
Service line
Injection & Repair
Region
UAE
Lead time
On request
Overview
Low-viscosity structural epoxy is injected under pressure through surface packers to fill and bond dormant cracks in concrete — restoring load-transfer capacity and creating a permanent monolithic repair.
Systems & specifications
Key advantages
Low-viscosity structural epoxy resins
Surface and drilled-port packer installation
Pressure-controlled single and twin-pump injection
Crack width 0.1 mm and above
Documented injection logs per crack
How we execute
Engineering capability
Surface compatibility
QA / QC procedure
Equipment capability
Our diagnostic process
We find the root cause before we quote.
Every repair starts with a structured site investigation — so the fix is permanent, not cosmetic.
- 01Crack mapping & width measurement
- 02Moisture and chloride testing
- 03Concrete cover & rebar scan (GPR)
- 04Hydrostatic head assessment
- 05Resin selection per crack movement
Repair methods
The right technique, not a one-size repair.
02
Polyurethane resin injection
Hydrophobic or hydrophilic PU resins seal active, water-bearing cracks by foaming on contact with moisture.
03
Hybrid two-stage injection
PU foam first stops the leak, followed by epoxy for permanent structural sealing.
Emergency response
Site survey within 24 hours across UAE — crews mobilised the same week.
Evidence from site
Typical applications
Where structural crack injection delivers value across UAE infrastructure, industrial and commercial assets.
- General
Structural slabs, beams, and columns
- General
Shear walls and retaining structures
- Building
Bridge decks and infrastructure repairs
- Civil
Industrial floors and foundations
Sectors served
InfrastructureTunnels & MetroCommercialIndustrialWater Sector
Frequently asked
Structural Crack Injection — answered.
Common questions from UAE consultants, clients and contractors. Need something specific? Speak with our technical team.
Epoxy is used when the crack is dormant and the repair must transfer load across the section. PU is used when the crack still moves or is actively leaking, because cured epoxy is rigid.
Where we deliver this service
Speak with our technical team
Specify Structural Crack Injection on your next project.
Share your project details and requirements, and our team will get in touch to discuss the most suitable solution.